Tuning the plasmonic resonance in TiN refractory metal.

Plasmonic coatings can absorb electromagnetic radiation from visible to far-infrared spectrum for the better performance of solar panels and energy saving smart windows. For these applications, it is important for these coatings to be as thin as possible and grown at lower temperatures on arbitrary substrates like glass, silicon, or flexible polymers. Here, we tune and investigate the plasmonic resonance of titanium nitride thin films in lower thicknesses regime varying from ~ 20 to 60 nm. High-quality crystalline thin films of route-mean-square roughness less than ~ 0.5 nm were grown on a glass substrate at temperature of ~ 200 °C with bias voltage of - 60 V using cathodic vacuum arc deposition. A local surface-enhanced-plasmonic-resonance was observed between 400 and 500 nm, which further shows a blueshift in plasmonic frequency in thicker films due to the increase in the carrier mobility. These results were combined with finite-difference-time-domain numerical analysis to understand the role of thicknesses and stoichiometry on the broadening of electromagnetic absorption.

A Dual Functional 2D MOF Exhibiting Rare Photosalient Effect as well as Selective Pd(II) Sensing in Aqueous Medium.

A Zn(II) based two-dimensional metal-organic framework (2D MOF) [Zn2(suc)2(4-nvp)2] (1) [H2suc = succinic acid and 4-nvp = 4-(1-naphthylvinyl)pyridine] exhibits a "photosalient effect" under UV light as well as sunlight along with the release of a stereoselective cyclobutane ligand, 1,3-bis(4'-pyridyl)-2,4-bis(naphthyl)cyclobutane (rctt-4-pncb). Photolysis of in situ generated MOF in solution also leads to the formation of rctt-4-pncb crystals. Interestingly, compound 1 shows a high selectivity for Pd(II) sensing in aqueous medium.

Sunlight-Induced In Situ Isomerization of Both Ligands in a Mixed-Ligand Coordination Polymer: From Photosalient to Photoinert Crystals.

Reaction of Zn(NO3 )2 ⋅ 6H2 O, maleic acid (H2 mal) and trans-4-(1-naphthylvinyl)pyridine (trans-nvp) in the dark results in the formation of a one-dimensional coordination polymer (1D CP) [Zn(mal)(trans-nvp)] (1), which is photosalient in nature. The crystals of 1 pop violently under UV light and moderately in sunlight, and generate cyclobutane ligands. However, the same reaction mixture kept in visible light exhibits the rare example of in situ isomerization of both ligands: cis-trans transformation of maleate and trans-cis isomerization of the nvp ligands, and subsequent formation of another 1D CP [Zn(fum)(cis-nvp)2 (H2 O)2 ] (2, H2 fum=fumaric acid), which is found to be photoinert. Thus, altering the reaction condition from dark to visible light gives rise to photosalient to photoinert crystals.

Sunlight assisted SCSC dimerization of a 1D coordination polymer impacts the selectivity of Pd(II) sensing in water.

A one-dimensional coordination polymer (1D CP) [Cd(4-nvp)2(5-ssa)]·(4-nvp) (1) [4-nvp = 4-(1-naphthylvinyl)pyridine and 5-ssa = 5-sulfosalicylic acid] undergoes topochemical [2+2] cycloaddition by sunlight irradiation to generate a two-dimensional (2D) CP [Cd(rctt-4-pncb)0.5(4-nvp)(5-ssa)]·(4-nvp) (1') [rctt-4-pncb = 1,3-bis(4'-pyridyl)-2,4-bis(naphthyl)cyclobutane] in a single-crystal to single-crystal manner. Interestingly, 1' can be reverted back to 1 by heating and both the CPs selectively recognize Pd2+ in aqueous medium; however, the limit of detection is improved after photodimerization.

Cholesterol Partition and Condensing Effect in Phase-Separated Ternary Mixture Lipid Multilayers.

The cholesterol partitioning and condensing effect in the liquid-ordered (Lo) and liquid-disordered (Ld) phases were systematically investigated for ternary mixture lipid multilayers consisting of 1:1 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dioleoyl-sn-glycero-3-phosphocholine with varying concentrations of cholesterol. X-ray lamellar diffraction was used to deduce the electron density profiles of each phase. The cholesterol concentration in each phase was quantified by fitting of the electron density profiles with a newly invented basic lipid profile scaling method that minimizes the number of fitting parameters. The obtained cholesterol concentration in each phase versus total cholesterol concentration in the sample increases linearly for both phases. The condensing effect of cholesterol in ternary lipid mixtures was evaluated in terms of phosphate-to-phosphate distances, which together with the estimated cholesterol concentration in each phase was converted into an average area per molecule. In addition, the cholesterol position was determined to a precision of (±0.7Å) and an increase of disorder in the lipid packing in the Lo phase was observed for total cholesterol concentration of 20∼30%.

Anomalous partitioning of water in coexisting liquid phases of lipid multilayers near 100% relative humidity.

Ternary lipid mixtures incorporating cholesterol are well-known to phase separate into liquid-ordered (L(o)) and liquid-disordered (L(d)) phases. In multilayers of these systems, the laterally phase separated domains register in columnar structures with different bilayer periodicities, resulting in hydrophobic mismatch energies at the domain boundaries. In this paper, we demonstrate via synchrotron-based X-ray diffraction measurements that the system relieves the hydrophobic mismatch at the domain boundaries by absorbing larger amounts of inter-bilayer water into the L(d) phase with lower d-spacing as the relative humidity approaches 100%. The lamellar repeat distance of the L(d) phase swells by an extra 4 Å, well beyond the equilibrium spacing predicted by the inter-bilayer forces. This anomalous swelling is caused by the hydrophobic mismatch energy at the domain boundaries, which produces a surprisingly long-range effect. We also demonstrate that the d-spacings of the lipid multilayers at 100% relative humidity do not change when bulk water begins to condense on the sample.

Accurate calibration and control of relative humidity close to 100% by X-raying a DOPC multilayer.

In this study, we have designed a compact sample chamber that can achieve accurate and continuous control of the relative humidity (RH) in the vicinity of 100%. A 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) multilayer can be used as a humidity sensor by measuring its inter-layer repeat distance (d-spacing) via X-ray diffraction. We convert from DOPC d-spacing to RH according to a theory given in the literature and previously measured data of DOPC multilamellar vesicles in polyvinylpyrrolidone (PVP) solutions. This curve can be used for calibration of RH close to 100%, a regime where conventional sensors do not have sufficient accuracy. We demonstrate that this control method can provide RH accuracies of 0.1 to 0.01%, which is a factor of 10-100 improvement compared to existing methods of humidity control. Our method provides fine tuning capability of RH continuously for a single sample, whereas the PVP solution method requires new samples to be made for each PVP concentration. The use of this cell also potentially removes the need for an X-ray or neutron beam to pass through bulk water if one wishes to work close to biologically relevant conditions of nearly 100% RH.

X-ray speckle visibility spectroscopy in the single-photon limit.

The technique of speckle visibility spectroscopy has been employed for the measurement of dynamics using coherent X-ray scattering. It is shown that the X-ray contrast within a single exposure can be related to the relaxation time of the intermediate scattering function, and this methodology is applied to the diffusion of 72 nm-radius latex spheres in glycerol. Data were collected with exposure times as short as 2 ms by employing a resonant shutter. The weak scattering present for short exposures necessitated an analysis formalism based on the spatial correlation function of individual photon charge droplets on an area detector, rather than the usual methods employed for intensity correlations. It is demonstrated that this method gives good agreement between theory and experiment and thus holds promise for extending area-detector-based coherent scattering methods to the study of faster dynamics than previously obtainable.

X-ray reflectivity at polarized liquid-Hg-aqueous-electrolyte interface: challenging macroscopic approaches for ion-specificity issues.

We report Angstrom-resolved x-ray reflectivity analysis of externally polarized liquid-Hg surface in contact with molar LiCl, LiBr, and MgSO4 aqueous electrolytes. Interpretation of reflectivity curves demonstrates a dependence of Hg-surface layering on both applied potential and ion nature. It further highlights how interfacial polarization degree impacts electron density profiles at a molecular scale. These profiles indicate accumulation of anions and cations at the Hg surface. Upon decrease of the potential from the point of zero charge, anions are gradually expelled from the Hg surface. The study challenges traditional thermodynamic approaches for deriving countercharge composition at the Hg-electrolyte-solution interface from macroscopic Hg-surface tension data. It further dismisses the long-standing approximation that assimilates the Hg surface to a smooth, perfect chemically inert conductor with a uniformly smeared-out surface charge density.